Videos relacionados con tricotín

COMO HACER UNA PULSERA TEJIDA CON TRICOTÍN CASERO ¡CON DOS TENEDORES!. TUTORIAL DIY

Tuto tricotin : le bonnet jersey bord côtes / Loom knit a beanie

Tutoriel de tricotin circulaire pour faire un joli bonnet au point jersey avec un bord en côtes. Vous trouverez les explications pour le faire en taille adulte, taille enfant et taille naissance !

Ver video "Tuto tricotin : le bonnet jersey bord côtes / Loom knit a beanie"

Automatic Spool Knitter, Knitting mill, Tricotin, i-cord machine, Strickmühle

With this machine you can make cords for macrame :) In the future I will show you how you can use this to make necklaces, collars, scarfs, bracelets, etc. How to Bracelet, watch here: \r
\r
Instructions for use:\r
\r
A) Affix handle (5). Thread the yarn (7) first through the lower guide (1) from the outside, then through the upper guide (2) and finally down through the central tube (3) of the knitting mill. \r
\r
B) Make sure that the tongues of all the needles (4) are pointing downwards and hold the knitting mill in your left hand. Also hold the yarn tightly in your left hand. \r
\r
C) Slowly turn the handle clockwise (5) until the first hook (4) picks up the yarn. Turn the handle forward only (in the direction of the arrow, never turn it backwards). Then pass the yarn behind the second needle, i.e. this needle is missed out. Continue to turn slowly until the third hook picks up the yarn. Hook the weight (6) onto the end of the yarn. Pass the yarn behind the fourth needle, missing it out. Continue to turn slowly. \r
\r
D) On the second turn all the hooks (4) pick up the yarn. From the third turn onwards the handle can be turned faster. Move the weight (6) up now and again. \r
\r
E) When beginning a new ball of wool, knot the yarn together, cut off the ends of the yarn and continue to turn slowly. Take care that the knot does not catch in the threading guides. \r
F) When you have finished, cut the yarn and continue turning until the knitted cord is thrown off the needles. Pull the end of the yarn through the open stitches tightly with a wool needle and stitch up. \r
\r
Tightly twisted wool, suitable for pin gauges 3 - 3.5 mm, gives the best results. \r
If the wool is not of a very good quality, i.e. if the wool is somewhat coarse, it will not glide so well which can lead to malfunctions. This also applies to very fibrous or fluffy wool such as mohair. During use, always make sure that the tongue of the needle which grasps the yarn is clipped downwards, the hooks close tightly and then completely release the yarn. The yarn must run loosely from the ball of wool (7). The weight should not pull the yarn downwards until the third hook grasps the yarn (3). \r
\r
1. Lower guide\r
2. Upper guide\r
3. Tube\r
4. Needles\r
5. Rotate handle in this direction\r
6. Weight\r
7.Pull yarn out off ball

Ver video "Automatic Spool Knitter, Knitting mill, Tricotin, i-cord machine, Strickmühle"